JX2020S is a fortified angle processing machine,the cylinder moving and the piston fixed.

The board of mainframe, mould base,punching holder and some other parts are fortified,

so that the machine can ensure higher pressure and heavy load for long-term and steady running.

Punching part, cyliner moving and guided by eight side,piston fixed.

Keep balance of the moving of punches, improve the stability of the cylinder. The fixation point of piston is spherical surface connect, eccentric-load can self-adjusted.

The press cylinder is upright,guide surface sufficient,press-moving balanced,with high power of press,reduce the impact and the recoil of punchinig,and improve the stability of the

machine.

Centralized lubrication

Centralized lubrication,easy for maintenance,ensure fully lubricated for each side of the cylinder, increase service life,debase the failure rate.

This machine can be equipped with bigger marking unit, according to customer’ request, we can equipped with 1250KN marking unit to suffice big angle processing.

Parameter List

Function		Punching  Marking  Shearing
Model		JX2020S
Angle size	16Mn	63X63X4-200X200X20
Angle size	Q235A
Max.punching Capability(DxT)	16Mn	26x20
Max.punching capability(DxT)	Q235A	26x20
Punching nominal force(Kn)		1000
Marking nominal(Kn)		600
Shearing nominal(Kn)		1200
Workpiece length max.(m)		14
Adjustment range of stadim(mm)		30-170
Punchers number each side		3
Marking groups		4
Dimension mode(mm)		14x10 or 16x10
Shearing mode		Double-blade cutting
Axes number		3
Infeed speed(m/min)		40
Overall dimension(m)		32x7x2.6
Net weight(Kg)		20000