Products
Location: Home >> Products >> CNC plate punching drilling machine CJZ120
CNC plate punching drilling machine CJZ120
CNC plate punching drilling machine CJZ120
This machine punching force is 120t, is widely used in transmission tower, telecommunication, or steel structure for connection plate punching, drilling and marking, also can be used in other mechanical and chemical industries.
Machine is composed of main frame, X, Y axis worktable, hydraulic system, electrical control system, drilling unit etc.
Machine advantages:
1. With computer, special programming software and system control software, finishes workpiece programming and operation monitor, breakdown inspection etc.
2. PLC adopts Japan MITSUBISHI FX series, with 2 axis CNC modular, together with X, Y axis compose position control loop, PLC and CNC form integrated part, greatly improves system reliability and flexibility.
3. X, Y axis adopt Japan YASKAWA advanced servo motor, ensures positioning accuracy and maintenance free, A, B axis max. positioning speed is 12m/min, no-load position accuracy is ±0.1mm.
4. With complete breakdown alarm system, can point out breakdown position and reasons.
5. Program can correct irregular workpice size.
1. With computer, special programming software and system control software, finishes workpiece programming and operation monitor, breakdown inspection etc.
2. PLC adopts Japan MITSUBISHI FX series, with 2 axis CNC modular, together with X, Y axis compose position control loop, PLC and CNC form integrated part, greatly improves system reliability and flexibility.
3. X, Y axis adopt Japan YASKAWA advanced servo motor, ensures positioning accuracy and maintenance free, A, B axis max. positioning speed is 12m/min, no-load position accuracy is ±0.1mm.
4. With complete breakdown alarm system, can point out breakdown position and reasons.
5. Program can correct irregular workpice size.
Parameters:
| No. | Name | Value | |
|---|---|---|---|
| 1 | Punching force | 1200kN | |
| 2 | Marking force | 1200kN | |
| 3 | Workpiece thickness | 5-30mm (punching) | |
| 40mm(drilling) | |||
| 4 | Max workpiece size | 1500x1000mm | |
| 5 | Max. punching diameter | Φ32mm (σb≤550N/ mm2) | |
| 6 | Max.drilling dia. | Φ50mm | |
| 7 | Min.distance from hole center to edge | 25mm (dia.≤26mm) | |
| 8 | Molds numbers | 3 | |
| 9 | Letter size | 14×10mm | |
| 10 | Letter numbers | 14 (2 rows) | |
| 11 | Max.moving speed of X.Y axis | 15m/min | |
| 12 | Hydraulic system pressure | Low pressure | 5MPa |
| High pressure | 25MPa | ||
| 13 | Air pressure | ≥0.5MPa | |
| 14 | CNC system | MITSUBISHI PLC | |
| 15 | Total motor power | ≈20kW | |
| 16 | Weight | 10000kg | |
| 17 | Overall size | 2735×3855×2722mm | |
