CNC machining center operation experience
6) In general, the tool length is set by the tool tip (in special cases, the tool is set in the middle of the tool). When setting the tool, carefully check the instructions in the program list.
7) When the program is interrupted or the tool must be adjusted again, pay attention to whether the depth can meet the front. Generally, it can be adjusted by 0.1mm first, and then adjusted according to the situation.
8) If water-soluble cutting fluid is used for the rotary retractable cutter head, it should be immersed in lubricating oil for several hours every half month for maintenance, so that the internal parts of the cutter head can be lubricated without wear.
Kevin
kevin@jntime.com
Tel/Whatsapp: +86 15863141078
Address: No. 3999 , Airport Road, Lingang Economic Development Zone, Jinan,Shandong,China
Zip:250107 Fax:0531-8873 5288 Sales Hotline:0531-8873 5188
After-Sales Hotline:136 0641 1517/150 2000 3877/133 0531 7322