CNC machining center operation experience
Precautions for clamping tools
1) The tool shall be firmly clamped and shall not be too short in the handle.
2) Before each cable cutter, check whether the cutter meets the requirements. The length of the cable cutter shall be determined according to the processing depth indicated in the program sheet, which is generally 2mm longer than the processing depth value, and consider whether the tool handle collides.
3) When the machining depth is very deep, you can communicate with the programmer and use the method of two-time rope cutter as appropriate, that is, ask for half to 2 / 3 of the length first, and then ask for a longer length when machining to a deeper position, which can improve the machining efficiency.
4) When using the extended cable tip, it is particularly necessary to understand the data such as the cutting depth and the required cutting length.
5) Before the cutter head is installed on the machine, the taper fitting position should be wiped clean with a cleaning cloth, and the corresponding position of the tool sleeve of the machine tool should also be cleaned to avoid iron chips on the fitting surface affecting accuracy and damaging the machine tool.
Kevin
kevin@jntime.com
Tel/Whatsapp: +86 15863141078
Address: No. 3999 , Airport Road, Lingang Economic Development Zone, Jinan,Shandong,China
Zip:250107 Fax:0531-8873 5288 Sales Hotline:0531-8873 5188
After-Sales Hotline:136 0641 1517/150 2000 3877/133 0531 7322