CNC machining center operation experience
Precautions before processing
1) For the new mold, the processing drawing shall meet the requirements and the data shall be clear; The processing drawing of the new mold shall be signed by the supervisor, and all columns of the processing drawing have been filled in.
2) The workpiece shall be provided with the qualification mark of the quality department.
3) After receiving the procedure sheet, check whether the workpiece reference position is consistent with the drawing reference position.
4) See each requirement on the procedure sheet clearly and confirm whether the program is consistent with the requirements of the drawings. If there is any problem, it must be solved together with the programmer and the production team.
5) According to the material and size of the workpiece, judge the rationality of the tool selected by the programmer for rough or smooth cutting procedures. If it is found that the tool application is unreasonable, immediately notify the programmer to make corresponding changes so as to improve the processing efficiency and workpiece processing accuracy.
Kevin
kevin@jntime.com
Tel/Whatsapp: +86 15863141078
Address: No. 3999 , Airport Road, Lingang Economic Development Zone, Jinan,Shandong,China
Zip:250107 Fax:0531-8873 5288 Sales Hotline:0531-8873 5188
After-Sales Hotline:136 0641 1517/150 2000 3877/133 0531 7322