Troubleshooting:
1) Replace the bearing
2) Correction screw rod bus
3) Re stick the wear-resistant plate. If the guide rail is scratched too seriously, it shall be handled again
4) Adjust the servo gain parameters to match the mechanical parameters
Kevin
kevin@jntime.com
Address: No. 3999 , Airport Road, Lingang Economic Development Zone, Jinan,Shandong,China
Zip:250107 Fax:0531-8873 5288 Sales Hotline:0531-8873 5188
After-Sales Hotline:136 0641 1517/150 2000 3877/133 0531 7322