Tool jam during machining
1) Loosen the brake device on the motor and rotate the outer hexagon on the motor with an adjustable wrench. Generally, the rotation direction is the same as the clamping direction of the tool arm. In short, the tool arm for automatic tool change is separated from the spindle of the high-speed vertical machining center.
Kevin
kevin@jntime.com
Address: No. 3999 , Airport Road, Lingang Economic Development Zone, Jinan,Shandong,China
Zip:250107 Fax:0531-8873 5288 Sales Hotline:0531-8873 5188
After-Sales Hotline:136 0641 1517/150 2000 3877/133 0531 7322