Siemens 808d system is adopted for high-speed CNC drilling and milling machine. Batch debugging steps of this single power head high-speed CNC drilling and milling machine are as follows:(11) relevant parameters and instructions of spindle debuggingAfter confirming that the connection of the spindle is correct, the self-learning process is first performed after power on, as follows:
1 Unplug T3 terminal to ensure that ST has no signal input. Note: if the T3 motor is not pulled out, the state is wrong after self-learning, and the speed cannot rise
2 When the parameter a1.10 (DN) = 7, the driver starts the self-learning mode, and the screen displays Lear, which will last for several minutes
3 When the LED displays f.0, the motor self-learning is completed, and the parameter a1.11 (DN 13) is set to 1, and the motor self-matching parameters
4 Self learning completion
Kevin
kevin@jntime.com
Address: No. 3999 , Airport Road, Lingang Economic Development Zone, Jinan,Shandong,China
Zip:250107 Fax:0531-8873 5288 Sales Hotline:0531-8873 5188
After-Sales Hotline:136 0641 1517/150 2000 3877/133 0531 7322