(3) the lighting distribution box (board) is not installed firmly, and the elevation does not meet the requirements. When it is installed in a concealed way, the edge around the panel is not close to the wall.
Measures: the elevation shall meet the design requirements. If not specified in the design, the height from the bottom edge of the lighting distribution box to the ground should be 1.5m. The height from the bottom edge of the lighting distribution board to the ground should be 1.8m. The lighting distribution box (board) shall be installed firmly, and the allowable deviation of installation perpendicularity shall not be more than 3mm. In case of concealed installation, there shall be no gap around the distribution box, the edges around the panel shall be close to the wall, and the contact parts between the box and buildings and structures shall be coated with anti-corrosion paint.
Consequence: the installation elevation of lighting distribution box (board) does not meet the requirements, the installation is not firm, and the box is not vertical. When the panel is concealed, the edges around the panel do not cling to the wall, affecting the use function, and the appearance is not good.
Kevin
kevin@jntime.com
Address: No. 3999 , Airport Road, Lingang Economic Development Zone, Jinan,Shandong,China
Zip:250107 Fax:0531-8873 5288 Sales Hotline:0531-8873 5188
After-Sales Hotline:136 0641 1517/150 2000 3877/133 0531 7322