In stereo garage plate processing equipment: CNC Beam drilling machine, in use process should pay attention to the following questions:
1, three-dimensional garage equipment: CNC drilling machine installation area safety in three dimensions:
1) should choose appropriate installation location, if inside the workshop to install use, because of the machine tool front-rear road is very long, should choose to other people is not easy to install across the region.
(2) the feeding and discharging, both sides should be set to prevent personnel horizontally across the fence.
2, three-dimensional garage equipment: CNC drilling operation in safety matters in three dimensions:
(1) the machine during operation, absolutely prohibited from entering the machine internal.
(2) bit change should stop when the various parts of the machine tool operation, and screw control knob to "change a bit".
(3) maintenance personnel to enter the internal machine should be absolute cut off the power of the machine tool, and the modes. Is allowed to start the machine.
(4) check machine power supply grounding protection is normal.
Three-dimensional garage equipment: CNC beam drilling machine in the use of note that in a bit change, when maintenance must power cuts, with specialist care. Work process, barred from entering the machine internal and banned transverse through the device.
cc: kevin kevin@jntime.com
Address: No. 3999 , Airport Road, Lingang Economic Development Zone, Jinan,Shandong,China
Zip:250107 Fax:0531-8873 5288 Sales Hotline:0531-8873 5188
After-Sales Hotline:136 0641 1517/150 2000 3877/133 0531 7322